CCPAM3000B G. SHDSL BIS ROUTER

     CCPAM3000B is used G.shdsl Bis technology that uses twisted pair for transmission of broadband access equipment. It follows ITUG.991.2, G.994.1, IEEE-EFM standards, providing a 10M/100M adaptive Ethernet port, which uses a pair of twisted-pair in the range of 2 to 6 kilometers to provide 192k to 5690kps bandwidth.

    CCPAM3000B not only with the central office DSLAM to use and can achieve point to point bridging or routing, can be widely used in the last mile access.

     CCPAM3000B can automatically detect up to the line rate of line quality and automatically adjust the transmit power the device can also be according to the needs of different users to set the maximum rate of the device. It can be through the serial port, TELNET, browser, local or remote settings.

    CCPAM3000B with the voice separator, can be transmitted along telephone signal

 Features

 Ø on the phone lines for high-speed symmetric transmission

 Ø use of PAM16, PAM32 encoding, G.991.2 and G.994.1 standards compliant

 Ø Support Annex.A, B, G, F, AF, BG Model

 Ø can be used with an interconnection PC or LAN to support the port auto-flip

 Ø can provide the range of symmetric transmission rate: 192Kbps to 5.69 Mbps

 Ø support for PPPoE (RFC2516), PPP (RFC2364) and IP (RFC 2225/RFC1577) over ATM over SHDSL

 Ø Support LLC / VC MUX encapsulation of RFC2684 (RFC1483) Bridge / Router Mode

 Ø DHCP server makes it easier to manage LAN IP addresses

 Ø allows LAN users through NAT (IP sharing) simultaneously access the Internet

 Ø through the Ethernet interface and SHDSL connections to Telnet, SNMP and serial port configuration and management of

 Ø software updates via TFTP

 Ø CO side DSLAM or more compatible with mainstream service access system

 Ø has a SHDSL line quality monitoring capabilities, real-time line status statistics.

 Ø high-quality, simple operation and low power consumption.

 Ø with dedicated voice splitter can transmit voice